NSN 5305-01-448-1188
High Torque Screw
Between 0.733 inches and 0.763 inches fastener length, flat countersunk head style, between 0.258 inches and 0.305 inches head diameter, grip diameter: between 0.2037 inches and 0.2043 inches .
Manufacturer part number H185-3-6R for national stock number 5305014481188.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-448-1188.
-
MPN or Model
H185-3-6R
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.348 inches and 0.378 inches -
Fastener Length
Between 0.733 inches and 0.763 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.258 inches and 0.305 inches -
Grip Diameter
Between 0.2037 inches and 0.2043 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 49.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-001-9753 MPN BACB30LK3U7Close Tolerance Screw
- 5305-00-459-0885 MPN AIC84-3-9Machine Screw
- 5305-00-505-3039 MPN LS15265V3-19Close Tolerance Screw
- 5305-00-971-7539 MPN A1C82-5-13Machine Screw
- 5305-01-054-6258 MPN AIC985-3-11PClose Tolerance Screw
- 5305-01-125-1197 MPN AIC811-08-23Socket Head Cap Screw
- 5305-01-158-5368 MPN SC2671-06-6Machine Screw
- 5305-01-212-2202 MPN AIC4038-06-02Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-448-1188 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
H185-3-6R | Huck International, Inc. |
AIC985-3-6R | Sps Technologies, Llc |
VT1694-3-6R | Arconic Global Fasteners & Rings, |
PBF1166-3-6R | Sps Technologies, Llc |
121558-3-6R | Sps Technologies, Llc |
VT1694-3-6R | Alcoa Global Fasteners, Inc. |
C7985-3-6R | Lockheed Martin Corporation |
C7985-3-6R | Sps Technologies, Llc |
H185-3-6R | Huck Intl Inc |