NSN 5305-01-448-6195
High Torque Screw
Between 0.980 inches and 1.000 inches fastener length, pan head style, between 0.473 inches and 0.492 inches head diameter, head height: between 0.162 inches and 0.175 inches .
Manufacturer part number NAS7704-10 for national stock number 5305014486195.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-448-6195.
-
MPN or Model
NAS7704-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.345 inches and 0.395 inches -
Fastener Length
Between 0.980 inches and 1.000 inches -
Head Style
Pan -
Head Diameter
Between 0.473 inches and 0.492 inches -
Head Height
Between 0.162 inches and 0.175 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-6049 military specification 1st material response or ams 6322 assn standard 2nd material response -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf -
Specification Data
80205-nas7704 professional/industrial association standard
More from these suppliers
- 5940-01-449-7678 MPN NAS1063A12-N1001Terminal Board Marker Strip
- 5935-01-597-0333 MPN E0165D20A01XSpec Connector Rect
- 5940-01-615-1074 MPN NAS1063Terminal Board Marker Strip
- 5940-01-451-4408 MPN NAS1063A10-105BXTerminal Board Marker Strip
- 5305-00-043-2681 MPN MS24694S96Machine Screw
- 5305-00-052-8902 MPN MS24630-56Tapping Screw
- 5305-00-080-9238 MPN NAS584-11Machine Screw
- 5305-00-081-1737 MPN NAS514P1032-8PMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-448-6195 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7704-10 | National Aerospace Standards |