NSN 5305-01-448-8315
High Torque Screw
Between 1.138 inches and 1.168 inches fastener length, flat countersunk head style, between 0.350 inches and 0.399 inches head diameter, grip diameter: between 0.2646 inches and 0.2651 inches .
Manufacturer part number NAS1581F4T12X for national stock number 5305014488315.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-448-8315.
-
MPN or Model
NAS1581F4T12X
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.378 inches and 0.428 inches -
Fastener Length
Between 1.138 inches and 1.168 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.350 inches and 0.399 inches -
Grip Diameter
Between 0.2646 inches and 0.2651 inches -
Internal Drive Style
Offset cruciform (torque set) -
Grip Length
Between 0.740 inches and 0.760 inches -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Specification Data
80205-nas1581 professional/industrial association standard
More from these suppliers
- 5940-01-336-8434 MPN NAS1057T6-050Stud Terminal
- 5940-01-470-3346 MPN NAS1063A2-107BATerminal Board Marker Strip
- 5935-01-322-4929 MPN NAS820-32AElectrical Connector Cover
- 5305-00-007-0282 MPN NAS1100E08-12PMachine Screw
- 5305-00-008-9113 MPN NAS1190C02T4LSocket Head Cap Screw
- 5305-00-016-7126 MPN NAS1352-6LL32PSocket Head Cap Screw
- 5305-00-051-4503 MPN MS51973-28Setscrew
- 5305-00-138-4367 MPN NAS2805-12Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-448-8315 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581F4T12X | National Aerospace Standards |