NSN 5305-01-448-8664
High Torque Screw
Between 1.048 inches and 1.078 inches fastener length, flat countersunk head style, between 0.578 inches and 0.634 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number NAS1580C5R9 for national stock number 5305014488664.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-448-8664.
-
MPN or Model
NAS1580C5R9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.476 inches and 0.526 inches -
Fastener Length
Between 1.048 inches and 1.078 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.578 inches and 0.634 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.3125 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5732 assn standard single material response or ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5940-01-425-7394 MPN NAS1063A11-322Terminal Board Marker Strip
- 5305-00-001-4713 MPN NAS1102C04-18Machine Screw
- 5305-00-007-6187 MPN NAS1100C08-32Machine Screw
- 5305-00-205-3920 MPN NAS333CPA62Close Tolerance Screw
- 5305-00-218-5447 MPN NAS1635-02-8Machine Screw
- 5305-00-225-9450 MPN MS16995-70Socket Head Cap Screw
- 5305-00-324-8634 MPN NAS663V10Close Tolerance Screw
- 5305-00-455-7450 MPN MS24693-A54Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-448-8664 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580C5R9 | National Aerospace Standards |