NSN 5305-01-448-9384
High Torque Screw
Between 1.106 inches and 1.126 inches fastener length, crowned hexagon head style, between 0.126 inches and 0.141 inches head height, width between flats: 0.488 inches .
Manufacturer part number MS3369A411 for national stock number 5305014489384.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-448-9384.
-
MPN or Model
MS3369A411
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3d -
Thread Direction
Right-hand -
Thread Length
0.422 inches -
Fastener Length
Between 1.106 inches and 1.126 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
0.488 inches -
Grip Diameter
Between 0.3737 inches and 0.3742 inches -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
Between 0.688 inches and 0.704 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
23000 pounds per square inch -
Material
Nickel alloy 600 spring -
Surface Treatment
Passivate spring -
Thread Series Designator
Unjf -
Specification Data
96906-ms3369a411 government standard
More from these suppliers
- 5935-00-018-0546 MPN MS3144E19-50SElectrical Receptacle Connector
- 5950-00-108-8530 MPN MS90541-06Radio Frequency Coil
- 5940-00-113-9820 MPN MS20659-28Lug Terminal
- 5975-00-156-3253 MPN MS3367-2-3Electrical Components Tiedown Strap
- 5935-00-171-0133 MPN MS27473T24A35SAElectrical Plug Connector
- 5935-00-201-5335 MPN MS3102C22-1PElectrical Receptacle Connector
- 5945-00-250-7908 MPN MS25463-D1Electromagnetic Relay
- 5935-00-262-7922 MPN MS3108A32-5SElectrical Plug Connector
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-448-9384 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS3369A411 | Military Standards |
MS3369A411 | Military Standards |