NSN 5305-01-448-9870
High Torque Screw
Between 1.058 inches and 1.088 inches fastener length, flat countersunk head style, between 0.246 inches and 0.280 inches head diameter, grip diameter: between 0.1365 inches and 0.1375 inches .
Manufacturer part number NAS7501-12 for national stock number 5305014489870.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-448-9870.
-
MPN or Model
NAS7501-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 1.058 inches and 1.088 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.246 inches and 0.280 inches -
Grip Diameter
Between 0.1365 inches and 0.1375 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.138 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5737 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type ii class 2 federal specification all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-460-1733 MPN NAS0745/14Conductor Splice
- 4920-01-571-0094 MPN NAS1212R20JK68 Strap Assembly-tie
- 5940-01-384-5052 MPN NAS1063A20TB42BTerminal Board Marker Strip
- 5305-00-068-5412 MPN NAS1352C02H8Socket Head Cap Screw
- 5305-00-151-6246 MPN MS16996-31BSocket Head Cap Screw
- 5305-00-167-3668 MPN AN525-8-32Machine Screw
- 5305-00-180-0003 MPN MILS7839Machine Screw
- 5305-00-205-3918 MPN MS27039-8-10Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-448-9870 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7501-12 | National Aerospace Standards |
NAS7501-12 | National Aerospace Standards |
NAS7501-12 | National Aerospace Standards |