NSN 5305-01-449-3479
Panel Screw
1.370 inches fastener length, flat countersunk head style, between 0.292 inches and 0.332 inches head diameter, first diameter from head: between 0.115 inches and 0.135 inches .
Manufacturer part number 917AS246 for national stock number 5305014493479.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-449-3479.
-
MPN or Model
917AS246
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.420 inches -
Fastener Length
1.370 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.292 inches and 0.332 inches -
First Diameter From Head
Between 0.115 inches and 0.135 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
Between 0.930 inches and 0.970 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.164 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
80000 pounds per square inch -
Countersink Angle
Between 80.0 degrees and 82.0 degrees -
Externally Relieved Body Diameter Quantity
1 -
Material
Stainless steel -
Material Specification
Qq-s-763 300 series federal specification single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-007-7329 MPN 247ASC0395-079Electrical Plug Connector Body
- 5950-00-009-3857 MPN 67A28B315Radio Frequency Coil
- 4820-00-062-5179 MPN 64A92C948Fluid Pressure Regulating Valve
- 5905-00-112-1255 MPN 65A81-C838Inductive Wire Wound Fixed Resistor
- 5905-00-163-2279 MPN 247ASC1833-005Thermal Resistor
- 5905-00-247-2636 MPN 247ASC0489-015Inductive Wire Wound Fixed Resistor
- 1680-00-413-0378 MPN MBEU37129Emerg Seat Rod Assy
- 5930-00-422-0511 MPN 68A-75-C482-6Rotary Switch
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-449-3479 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
917AS246 | Naval Air Systems Command |