NSN 5305-01-449-3797
High Torque Screw
1.133 inches fastener length, fillister countersunk head style, between 0.515 inches and 0.535 inches head diameter, head height: between 0.096 inches and 0.109 inches .
Manufacturer part number SC1776-6-9 for national stock number 5305014493797.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-449-3797.
-
MPN or Model
SC1776-6-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.570 inches -
Fastener Length
1.133 inches -
Head Style
Fillister countersunk -
Head Diameter
Between 0.515 inches and 0.535 inches -
Head Height
Between 0.096 inches and 0.109 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 0.553 inches and 0.573 inches -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-146-7192 MPN AIC1023V5-22Close Tolerance Screw
- 5305-00-460-3030 MPN AIC792-4-12Close Tolerance Screw
- 5305-00-727-8336 MPN TS705-04-6CRMachine Screw
- 5305-00-902-7874 MPN AIC82-5-20Machine Screw
- 5305-01-004-9520 MPN AIC817-08-107CSocket Head Cap Screw
- 5305-01-014-8454 MPN NAS1101E02-7Machine Screw
- 5305-01-048-1136 MPN AIC811-02-9Socket Head Cap Screw
- 5305-01-158-5373 MPN AIC940-5-6Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-449-3797 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SC1776-6-9 | Arconic Global Fasteners & Rings, |
VT1696-6-9 | Arconic Global Fasteners & Rings, |
PBF1198-6-9 | Sps Technologies, Llc |
121754-6-9 | Sps Technologies, Llc |
121754-6-9 | Sps Technologies, Llc |
VT1696-6-9 | Alcoa Global Fasteners, Inc. |
C9535-6-9 | Lockheed Martin Corporation |
121754-6-9 | Tab Engineering |
AIC9535-6-9 | Sps Technologies, Llc |
C9535-6-9 | Sps Technologies, Llc |