NSN 5305-01-450-0726
High Torque Screw
Between 0.951 inches and 0.981 inches fastener length, flat countersunk head style, between 0.3504 inches and 0.3988 inches head diameter, grip diameter: between 0.3422 inches and 0.3432 inches .
Manufacturer part number NAS1580F4T9Y for national stock number 5305014500726.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-450-0726.
-
MPN or Model
NAS1580F4T9Y
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
Between 0.951 inches and 0.981 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.3504 inches and 0.3988 inches -
Grip Diameter
Between 0.3422 inches and 0.3432 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.553 inches and 0.573 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
16000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4140 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-6040 military specification 3rd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 class 2 federal specification all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-081-2861 MPN 12S902-3Aircraft Door
- 1560-00-118-9719 MPN 12W6029-9Aircraft Structural Plate
- 5935-00-135-6056 MPN C174-6Electrical Plug Connector
- 1560-00-137-3995 MPN 12W523-37Aircraft Structural Component Support
- 5940-00-137-6084 MPN C4812-21Conductor Splice
- 1560-00-226-4898 MPN 12W6435-7Aircraft Trailing Edge
- 1560-00-247-1667 MPN 12B10352-19Aircraft Fairing
- 1560-00-407-9968 MPN 12Y1395-11Details Cabin Valve Bracket
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-450-0726 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580F4T9Y | Lockheed Martin Corporation |