NSN 5305-01-450-0749
Bolt Stove
Magnetic permeability shall not exceed 2.0 after fabrication.
Manufacturer part number 5468032-10 for national stock number 5305014500749.
Datasheet
-
Product description
Machine Screw NSN 5305-01-450-0749.
-
MPN or Model
5468032-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
133300 - Machinery/machines NOI -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.102 inches and 0.183 inches -
Fastener Length
Between 0.219 inches and 0.250 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.195 inches and 0.225 inches -
Locking Feature
Patch -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.112 inches -
Thready Qty Per Inch (tpi)
40 -
Min. Tensile Strength (psi)
80000 pounds per square inch -
Countersink Angle
Between 80.0 degrees and 82.0 degrees -
Screw Material
Steel comp 316 -
Locking Feature Material
Plastic polyamide -
Locking Feature Material Specification
Mil-f-18240 military specification single material response -
Screw Surface Treatment
Passivate -
Screw Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unc -
Nondefinitive Specification/std Data
Type and 2c style
More from these suppliers
- 4820-00-024-1407 MPN 54101-58-84PC4Valve Disk
- 4820-00-042-3047 MPN 13G0017-262Valve Stem
- 5935-00-075-5198 MPN 2888170-1Electrical Receptacle Connector
- 5905-00-131-5807 MPN 1638013-104Film Fixed Resistor
- 4820-00-188-8265 MPN 810-1385722Angle Valve
- 4820-00-217-2772 MPN 4824-3198197PC19Valve Disk
- 4820-00-382-7828 MPN 388298ALT5PC11VL14Valve Gland
- 4820-00-495-6213 MPN 522-4805-722451PCV30Gate Valve
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-450-0749 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
5468032-10 | Naval Sea Systems Command |