NSN 5305-01-450-7049
High Torque Screw
2.112 inches fastener length, flat countersunk head style, between 0.464 inches and 0.506 inches head diameter, head height: 0.111 inches .
Manufacturer part number NAS1790V4-27 for national stock number 5305014507049.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-450-7049.
-
MPN or Model
NAS1790V4-27
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
2.112 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.464 inches and 0.506 inches -
Head Height
0.111 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
1.687 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Material
Titanium alloy -
Thread Series Designator
Unjf
More from these suppliers
- 5905-01-658-6000 MPN M55342K09B2E49RFilm Fixed Resistor
- 5935-01-577-3543 MPN MS27488-20Electrical Connector End Seal Plug
- 5940-01-384-3892 MPN NAS1063A8TB98TTerminal Board Marker Strip
- 5305-00-007-9895 MPN NAS1102C04-12PMachine Screw
- 5305-00-008-5882 MPN NAS1101C04-4PMachine Screw
- 5305-00-019-9914 MPN NAS334CP40Close Tolerance Screw
- 5305-00-052-8878 MPN MS24630-9Tapping Screw
- 5305-00-059-7408 MPN MS35202-25Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-450-7049 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1790V4-27 | National Aerospace Standards |
G5305011312198 | Naval Inventory Control Point |