NSN 5305-01-451-1228
Tap Bolt
Between 1.210 inches and 1.250 inches fastener length, flat chamfer head style, between 0.550 inches and 0.562 inches head diameter, head height: between 0.368 inches and 0.375 inches .
Manufacturer part number 701-5564297 P/N 43 for national stock number 5305014511228.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-01-451-1228.
-
MPN or Model
701-5564297 P/N 43
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.085 inches and 1.250 inches -
Fastener Length
Between 1.210 inches and 1.250 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.550 inches and 0.562 inches -
Head Height
Between 0.368 inches and 0.375 inches -
Thread Diameter
0.375 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
150000 pounds per square inch -
Hardness Rating
23.0 rockwell b and 34.0 rockwell c -
Minimum Yield Strength
92000 pounds per square inch -
Material
Steel uns k03104 -
Material Specification
Astma574 federal specification single material response -
Thread Series Designator
Unc -
Specification Data
81348-mils-1222 government specification
More from these suppliers
- 4820-00-140-3699 MPN 1385623Valve Disk
- 4820-00-186-3543 MPN 803-4384536-73BAngle Valve
- 5935-00-847-1670 MPN 1981207PC11Electrical Receptacle Connector
- 5935-00-927-5292 MPN 5175113-002Tip Jack
- 5905-01-139-5314 MPN 6710657-33Film Fixed Resistor
- 5945-01-164-9956 MPN 5189319Relay Armature
- 4820-01-177-8726 MPN 5520412Ball Valve
- 5950-01-193-5993 MPN 5515524Radio Frequency Transformer
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-01-451-1228 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
701-5564297 P/N 43 | Naval Sea Systems Command |
3/8-16UNC-3A X 1 1/4 LG | Naval Sea Systems Command |