NSN 5305-01-451-6385
High Torque Screw
3.276 inches fastener length, flat countersunk head style, 0.280 inches head diameter, head height: 0.068 inches .
Manufacturer part number NAS1202-48 for national stock number 5305014516385.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-451-6385.
-
MPN or Model
NAS1202-48
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
3.276 inches -
Head Style
Flat countersunk -
Head Diameter
0.280 inches -
Head Height
0.068 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.164 inches -
Grip Length
3.276 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
100.0 degrees -
Material
Steel -
Material Specification
Nas498 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, ty2, cl2 federal specification single treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 5940-01-451-4311 MPN NAS1744-1Conductor Splice
- 5305-00-009-5709 MPN NAS1100E06-10PMachine Screw
- 5305-00-014-4723 MPN MS51861-14Tapping Screw
- 5305-00-050-9215 MPN MS24667-52Socket Head Cap Screw
- 5305-00-052-3618 MPN NAS1633C3Machine Screw
- 5305-00-052-5972 MPN MS35202-42Machine Screw
- 5305-00-052-8902 MPN MS24630-56Tapping Screw
- 5305-00-060-9820 MPN NAS221C31Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-451-6385 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1202-48 | National Aerospace Standards |