NSN 5305-01-451-6394
High Torque Screw
0.823 inches fastener length, flat countersunk head style, 0.303 inches head diameter, head height: 0.049 inches .
Manufacturer part number NAS8703-8 for national stock number 5305014516394.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-451-6394.
-
MPN or Model
NAS8703-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.7 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
0.823 inches -
Head Style
Flat countersunk -
Head Diameter
0.303 inches -
Head Height
0.049 inches -
Grip Diameter
0.188 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
0.500 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard all material responses or ams5737 assn standard all material responses -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 assn standard 1st treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 1680-01-479-6305 MPN NAS355-60-840Aircraft Control Tube Assembly
- 5940-01-386-4758 MPN NAS1063B105-120Terminal Board Marker Strip
- 5305-00-007-0282 MPN NAS1100E08-12PMachine Screw
- 5305-00-007-6172 MPN NAS1100E00-4Machine Screw
- 5305-00-007-9881 MPN NAS1100E04-7PMachine Screw
- 5305-00-051-2333 MPN NASM51958Machine Screw
- 5305-00-052-7483 MPN MS35198-85Machine Screw
- 5305-00-057-0509 MPN MS51958-12Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-451-6394 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS8703-8 | National Aerospace Standards |