NSN 5305-01-451-7877
High Torque Screw
Oversize grip dia.
Manufacturer part number LD111-0045-0717 for national stock number 5305014517877.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-451-7877.
-
MPN or Model
LD111-0045-0717
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.599 inches -
Fastener Length
Between 1.645 inches and 1.671 inches -
Head Style
Flat countersunk undercut -
Head Diameter
0.826 inches -
Head Height
0.184 inches -
Grip Diameter
Between 0.4521 inches and 0.4526 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.437 inches -
Grip Length
1.062 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-124-7701 MPN 55-22034Elevator Bal Weight
- 5975-00-376-6346 MPN 159-54132-5Flexible Metal Conduit Assembly
- 1560-00-449-3582 MPN 265-522052-31Bias Bungee Support
- 1560-00-791-4683 MPN 265-240424Rudder Pin Assembly
- 1560-00-798-2691 MPN 265-321285-1Lower Nacelle Hook
- 4920-01-156-9829 MPN 76A11000-001Interface Device Adapter Assembly
- 1680-01-181-4170 MPN L6311049-003Gearbox Support Plunger
- 1680-01-181-4189 MPN L5301277-021Electrical-electronic Equipment Control Panel
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-451-7877 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0045-0717 | Boeing Company, The |