NSN 5305-01-452-6001
Panel Screw
0.875 inches fastener length, knurled no. 4 head style, 0.375 inches head diameter, head height: 0.437 inches .
Manufacturer part number 350353-51 for national stock number 5305014526001.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-452-6001.
-
MPN or Model
350353-51
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.250 inches -
Fastener Length
0.875 inches -
Head Style
Knurled no. 4 -
Head Diameter
0.375 inches -
Head Height
0.437 inches -
Point Length
0.156 inches -
Point Style
Cone -
Internal Drive Style
Slot -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Externally Relieved Body Diameter Quantity
2 -
Point Chamfer Angle
Between 85.0 degrees and 95.0 degrees -
Material
Steel comp 303 -
Material Specification
Qq-s-763 federal specification single material response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-147-0563 MPN 434177-7Electrical Plug Connector Body
- 5950-00-222-6233 MPN DL74-664Power Transformer
- 5905-00-249-8130 MPN 240-1170P9Nonprecision Nonwire Wound Variable Resistor
- 5985-00-284-4283 MPN 1592-1208G3Antenna Reflector Section
- 5935-00-364-7559 MPN 373383-3Electrical Receptacle Connector
- 5950-00-411-6197 MPN 375MT332P003Reactor
- 5950-00-417-8857 MPN 385799-1Power Transformer
- 5905-00-434-3070 MPN 581449-1Thermal Resistor
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-452-6001 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
350353-51 | Braman Screw Machine Co Inc |
350353-51 | Carey Manufacturing Company, Inc. |
350353-51 | Raytheon Company |
350353-51 | Raytheon Company |
350353-51 | N S R Electrical Inc |