NSN 5305-01-454-5658
High Torque Screw
Between 0.683 inches and 0.713 inches fastener length, flat countersunk head style, between 0.296 inches and 0.331 inches head diameter, grip diameter: between 0.1630 inches and 0.1635 inches .
Manufacturer part number NAS7502U6 for national stock number 5305014545658.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-454-5658.
-
MPN or Model
NAS7502U6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
Between 0.683 inches and 0.713 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.296 inches and 0.331 inches -
Grip Diameter
Between 0.1630 inches and 0.1635 inches -
Internal Drive Style
Cross recess type iii -
Thread Diameter
0.164 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5732 assn standard single material response or ams5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjc -
Specification Data
80205-nas7502 professional/industrial association standard
More from these suppliers
- 5305-00-068-0540 MPN MS24677-23Socket Head Cap Screw
- 5305-00-105-9426 MPN NAS1352C6LN20Socket Head Cap Screw
- 5305-00-143-9315 MPN NAS1352C4LE16Socket Head Cap Screw
- 5305-00-145-0984 MPN NAS662C2LNR2Socket Head Cap Screw
- 5305-00-225-9102 MPN MS90726-47Hexagon Head Cap Screw
- 5305-00-251-3952 MPN NAS1124E7HClose Tolerance Screw
- 5305-00-253-5626 MPN MS21318-47Drive Screw
- 5305-00-273-4962 MPN MS24677-49Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-454-5658 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7502U6 | National Aerospace Standards |