NSN 5305-01-455-1406
High Torque Screw
Between 2.753 inches and 2.783 inches fastener length, flat countersunk head style, between 0.951 inches and 1.014 inches head diameter, grip diameter: between 0.4990 inches and 0.4995 inches .
Manufacturer part number NAS1580A8T32 for national stock number 5305014551406.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-455-1406.
-
MPN or Model
NAS1580A8T32
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.768 inches -
Fastener Length
Between 2.753 inches and 2.783 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.951 inches and 1.014 inches -
Grip Diameter
Between 0.4990 inches and 0.4995 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.500 inches -
Grip Length
Between 1.990 inches and 2.010 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches grip -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 4340 or steel comp 4140 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5935-00-111-1892 MPN NAS1665-16Electrical Connector Backshell
- 5305-00-083-4614 MPN NAS1581C3H5PClose Tolerance Screw
- 5305-00-090-4097 MPN MS21125-0514Close Tolerance Screw
- 5305-00-269-4211 MPN MS24694S153Machine Screw
- 5305-00-269-4513 MPN MS24694S168Machine Screw
- 5305-00-435-9097 MPN NAS1351-5LE14Socket Head Cap Screw
- 5305-00-460-0707 MPN NAS1298-5-7Shoulder Screw
- 5305-00-493-6733 MPN NAS1101E08-4Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-455-1406 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580A8T32 | National Aerospace Standards |