NSN 5305-01-455-6467
Panel Screw
Altered from part number 622-3271m1.
Manufacturer part number 717769319-001 for national stock number 5305014556467.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-455-6467.
-
MPN or Model
717769319-001
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.125 inches -
Fastener Length
1.525 inches -
Head Style
Knurled no. 6 -
Head Diameter
0.195 inches -
Head Height
0.650 inches -
Point Diameter
0.175 inches -
First Diameter From Head
Between 0.071 inches and 0.081 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
1.400 inches -
Point Style
Flat -
Internal Drive Style
Slot -
End Application
Lantirn -
Thread Diameter
0.112 inches -
Thready Qty Per Inch (tpi)
40 -
Externally Relieved Body Diameter Quantity
1 -
Part Name Assigned By Controlling Agency
Jackscrew assembly -
Material
Steel -
Surface Treatment
Chromate or nickel -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-400-4177 MPN 13084730Tip Jack
- 5985-01-238-0118 MPN 13082063-29Antenna Vane
- 5935-01-321-7074 MPN 717513005-001Electrical Connector Jackscrew
- 5935-01-390-5161 MPN 13231205-1Electrical Connector Backshell
- 5935-01-181-5589 MPN P83513-005-09Electrical Receptacle Connector
- 5935-01-222-1214 MPN 13083962-199Self-test Connector
- 1560-01-502-6010 MPN 717611000-089Aircraft Pylon Section
- 5935-01-222-1100 MPN 13081522Self-test Connector
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-455-6467 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
717769319-001 | Lockheed Martin Corporation |