NSN 5305-01-455-9759
High Torque Screw
Between 0.683 inches and 0.713 inches fastener length, flat countersunk head style, between 0.338 inches and 0.381 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number NAS7503DU6 for national stock number 5305014559759.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-455-9759.
-
MPN or Model
NAS7503DU6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
Between 0.683 inches and 0.713 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.338 inches and 0.381 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.080 inches first hole -
Internal Drive Style
Cross recess type iii -
Thread Diameter
0.190 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.524 inches first hole and 0.544 inches first hole -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5732 assn standard single material response or ams5737 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas7503 professional/industrial association standard
More from these suppliers
- 5940-00-259-8456 MPN NAS1464-028-02CStud Terminal
- 5935-01-355-3702 MPN AS34061Electrical Plug Connector
- 5940-01-384-3892 MPN NAS1063A8TB98TTerminal Board Marker Strip
- 5305-00-003-9278 MPN NAS1221-4E42Machine Screw
- 5305-00-007-3019 MPN NAS1102C02-3PMachine Screw
- 5305-00-038-2431 MPN NAS514P632-22BMachine Screw
- 5305-00-052-9329 MPN MS16996-21Socket Head Cap Screw
- 5305-00-057-1720 MPN NAS1101-06-7Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-455-9759 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7503DU6 | National Aerospace Standards |