NSN 5305-01-455-9771
High Torque Screw
Between 0.386 inches and 0.416 inches fastener length, flat countersunk head style, between 0.246 inches and 0.280 inches head diameter, grip diameter: between 0.1365 inches and 0.1375 inches .
Manufacturer part number NAS7501-2 for national stock number 5305014559771.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-455-9771.
-
MPN or Model
NAS7501-2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.386 inches and 0.416 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.246 inches and 0.280 inches -
Grip Diameter
Between 0.1365 inches and 0.1375 inches -
Internal Drive Style
Cross recess type iii -
Thread Diameter
0.138 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response and ams5732 assn standard single material response or ams5737 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416ty2 cl2zzzkj+80205-nas7501 assn standard 1st treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-443-8866 MPN NAS1063Terminal Board Marker Strip
- 1680-01-501-1699 MPN NAS1360C2C33FMateri Aircraft Pin
- 5305-00-052-6680 MPN MS35198-22Machine Screw
- 5305-00-057-0490 MPN MS24694-S4Machine Screw
- 5305-00-058-2066 MPN MS24677-2Socket Head Cap Screw
- 5305-00-092-6681 MPN MS21125-414Close Tolerance Screw
- 5305-00-144-3839 MPN MILS7839Machine Screw
- 5305-00-206-8698 MPN NAS221DD14Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-455-9771 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7501-2 | National Aerospace Standards |