NSN 5305-01-456-0785
High Torque Screw
Between 1.735 inches and 1.765 inches fastener length, flat countersunk head style, between 0.510 inches and 0.564 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number NAS4705D21 for national stock number 5305014560785.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-456-0785.
-
MPN or Model
NAS4705D21
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.437 inches -
Fastener Length
Between 1.735 inches and 1.765 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.510 inches and 0.564 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.080 inches first hole -
Internal Drive Style
Tri-wing recess -
Thread Diameter
0.312 inches -
Grip Length
Between 1.302 inches and 1.322 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.573 inches first hole and 1.593 inches first hole -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049 military specification 2nd material response or ams 6322 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, ty2, cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas4705 professional/industrial association standard
More from these suppliers
- 1680-01-501-4805 MPN NAS42DD8-80FCAircr Sleeve Spacer
- 5305-00-008-5914 MPN NAS1100C06-28Machine Screw
- 5305-00-008-9119 MPN NAS1190C04T22LSocket Head Cap Screw
- 5305-00-087-8703 MPN NAS603-70PMachine Screw
- 5305-00-161-9460 MPN NAS603-52PMachine Screw
- 5305-00-226-1064 MPN NAS662-3R20Machine Screw
- 5305-00-238-7400 MPN NAS608C632-5Socket Head Cap Screw
- 5305-00-245-3216 MPN MS35206-339Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-456-0785 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS4705D21 | National Aerospace Standards |