NSN 5305-01-456-5112
Panel Screw
1.380 inches fastener length, knurled no. 2 head style, 0.500 inches head diameter, head height: 0.500 inches .
Manufacturer part number 211088541 for national stock number 5305014565112.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-456-5112.
-
MPN or Model
211088541
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.380 inches -
Fastener Length
1.380 inches -
Head Style
Knurled no. 2 -
Head Diameter
0.500 inches -
Head Height
0.500 inches -
First Diameter From Head
0.140 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.440 inches -
Internal Drive Style
W/o internal drive -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel comp 304 -
Material Specification
Q-s-763 federal specification 13th material response -
Thread Series Designator
Unf
More from these suppliers
- 4820-00-054-3725 MPN 803-5001003-B9XX-07Valve Stem
- 5935-00-836-2109 MPN 2032095PC2REVBElectrical Receptacle Connector
- 5985-00-892-9429 MPN 2666380-1Radio Frequency Transmission Line Switch
- 5940-00-983-6044 MPN 527156-3Terminal Board
- 4820-01-026-8119 MPN 803-2177934-C516Globe Valve
- 5930-01-132-9042 MPN 3151637Actuator Switch
- 5930-01-164-9786 MPN 5189178-018Push Switch
- 5930-01-166-7145 MPN 0098-LL-TJ2-4211Push Switch
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-456-5112 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
211088541 | Naval Sea Systems Command |
6726479 FIND 21 (SHTS 1,2D,7) | Naval Sea Systems Command |
441-6726489 FIND 56 | Naval Sea Systems Command |
441-6726479 ITEM 21 | Naval Sea Systems Command |