NSN 5305-01-458-2165
High Torque Screw
Nutplate c bore between grip and threads/captive panel fastener.
Manufacturer part number S00465-4-7 for national stock number 5305014582165.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-458-2165.
-
MPN or Model
S00465-4-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.365 inches -
Fastener Length
Between 0.917 inches and 0.947 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.509 inches and 0.518 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5737 assn standard 1st material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-062-4125 MPN 53B334-20Machine Screw
- 5305-00-243-8319 MPN NAS1101E4-6Machine Screw
- 5305-00-419-0861 MPN NAS1101-6-10WMachine Screw
- 5305-00-802-0573 MPN 51B221-22Machine Screw
- 5305-00-929-4069 MPN A1C792-3-3Machine Screw
- 5305-00-932-1831 MPN 51B581-3-4Machine Screw
- 5305-01-095-4606 MPN AIC812-00-4Machine Screw
- 5305-01-205-9166 MPN C7984-3-12Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-458-2165 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
S00465-4-7 | Boeing Company, The |
AIC4465-4-7 | Sps Technologies, Llc |
SC1752-4-7 | Arconic Global Fasteners & Rings, |
FIT7977-4-7 | Fastener Innovation Technology, Inc. |
123370-4-7 | Sps Technologies, Llc |
SC1752-4-7 | Arconic Global Fasteners & Rings, |
S00465-4-7 | Sps Technologies |