NSN 5305-01-458-2919
Panel Screw
Between 0.282 inches and 0.312 inches fastener length, pan head style, between 0.205 inches and 0.219 inches head diameter, head height: between 0.070 inches and 0.080 inches .
Manufacturer part number 290-035-5013 for national stock number 5305014582919.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-458-2919.
-
MPN or Model
290-035-5013
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.115 inches and 0.135 inches -
Fastener Length
Between 0.282 inches and 0.312 inches -
Head Style
Pan -
Head Diameter
Between 0.205 inches and 0.219 inches -
Head Height
Between 0.070 inches and 0.080 inches -
First Diameter From Head
Between 0.070 inches and 0.080 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
Between 0.304 inches and 0.354 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.112 inches -
Thready Qty Per Inch (tpi)
40 -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel comp 303 -
Material Specification
Astm a582 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5905-00-098-8417 MPN 137-206-3653Film Fixed Resistor
- 5905-00-401-8639 MPN 137-524-0492Noninductive Wire Wound Fixed Resistor
- 5905-00-723-9197 MPN 138-114-0004Nonprecision Wire Wound Variable Resistor
- 5935-00-940-2962 MPN 1124-51190Connector Adapter
- 4820-00-950-9510 MPN 232-002-0001Check Valve
- 5985-01-136-4160 MPN 153-147-0036Waveguide Assembly
- 5950-01-436-1293 MPN 151-533-002Power Transformer
- 5905-00-104-8343 MPN 137-009-1005Composition Fixed Resistor
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-458-2919 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
290-035-5013 | Albany Fasteners |
290-035-5013 | Northrop Grumman Systems Corporation |