NSN 5305-01-459-0846
High Torque Screw
Threads undercut for relief. Griptapered to thread undercut.
Manufacturer part number S00465-4-10 for national stock number 5305014590846.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-459-0846.
-
MPN or Model
S00465-4-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.365 inches -
Fastener Length
Between 1.105 inches and 1.135 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.466 inches and 0.518 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.250 inches -
Grip Length
Between 0.615 inches and 0.625 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.00 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-501-9741 MPN LS15267V3-5Machine Screw
- 5305-00-591-4249 MPN AIC603-2Machine Screw
- 5305-00-827-7963 MPN 593111Machine Screw
- 5305-01-025-1345 MPN NAS1101E06-8Machine Screw
- 5305-01-069-2728 MPN NAS1101E3-12Machine Screw
- 5305-01-264-1474 MPN LD111-0044-0713Close Tolerance Screw
- 5305-01-348-8659 MPN AIC4414-3-44Machine Screw
- 5305-01-381-1902 MPN 1701-3-12Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-459-0846 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
S00465-4-10 | Boeing Company, The |
S00465-4-10 | Sps Technologies, Llc |
SC1752-4-10 | Arconic Global Fasteners & Rings, |
123370-4-10 | Sps Technologies, Llc |