NSN 5305-01-461-4071
Bolt Stove
Between 0.417 inches and 0.431 inches fastener length, flat countersunk head style, between 0.257 inches and 0.279 inches head diameter, head height: 0.500 inches .
Manufacturer part number 120-079-6-8 for national stock number 5305014614071.
Datasheet
-
Product description
Machine Screw NSN 5305-01-461-4071.
-
MPN or Model
120-079-6-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.417 inches and 0.431 inches -
Fastener Length
Between 0.417 inches and 0.431 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.257 inches and 0.279 inches -
Head Height
0.500 inches -
Width Between Flats
Between 0.036 inches and 0.044 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.138 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 80.0 degrees and 82.0 degrees -
Screw Material
Steel -
Screw Surface Treatment
Chromium -
Screw Surface Treatment Specification
Qq-c-320, type 1, class 1 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 1560-00-070-1173 MPN 209-030-263-37Fuel Cell Cavity Filler
- 1560-00-121-1208 MPN 205-030-164-239Beam Assembly Stiffener
- 1560-00-127-5802 MPN 206-032-113-1Aircraft Structural Component Support
- 1680-00-411-1001 MPN 212-001-302-001Cyl Control Support
- 1560-00-457-0800 MPN 212-060-204-002Ejector Exhaust Duct
- 1680-00-499-5479 MPN 22890-13Seat Fitting
- 1560-00-513-7862 MPN 205-030-385-17Guide
- 1560-00-701-9923 MPN 204-030-657-19Aircraft Window Panel
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-461-4071 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
120-079-6-8 | Bell Helicopter Textron Inc. |