NSN 5305-01-462-1650
High Torque Screw
Between 0.127 inches and 0.140 inches fastener length, flush head style, between 0.605 inches and 0.625 inches head diameter, head height: between 0.112 inches and 0.125 inches .
Manufacturer part number AIC9535-7-40 for national stock number 5305014621650.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-462-1650.
-
MPN or Model
AIC9535-7-40
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.683 inches -
Fastener Length
Between 0.127 inches and 0.140 inches -
Head Style
Flush -
Head Diameter
Between 0.605 inches and 0.625 inches -
Head Height
Between 0.112 inches and 0.125 inches -
Grip Diameter
Between 0.452 inches and 0.453 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.438 inches -
Grip Length
Between 2.490 inches and 2.510 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
19900 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-310-5246 MPN AIC811-06-12Socket Head Cap Screw
- 5305-01-158-6763 MPN SC2671-3-16Machine Screw
- 5305-01-160-7561 MPN HT4027-5-18Close Tolerance Screw
- 5305-01-188-7465 MPN AIC4038-06-32Machine Screw
- 5305-01-298-1298 MPN BACB30LU04-22Close Tolerance Screw
- 5305-01-381-2172 MPN 1701-3-13Close Tolerance Screw
- 5305-01-408-5305 MPN AIC1198-04-5Machine Screw
- 5305-01-472-9797 MPN TX1004V08-31Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-462-1650 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC9535-7-40 | Sps Technologies, Llc |
AIC9535-7-40 | Sps Technologies, Llc |
AIC9535-7-40 | Sps Technologies, Llc |
AIC9535-7-40 | Sps Technologies, Llc |
AIC9535-7-40 | Sps Technologies, Llc |
AIC9535-7-40 | Sps Technologies, Llc |
AIC9535-7-40 | Sps Technologies, Llc |
AIC9535-7-40 | Sps Technologies, Llc |