1-321-802-5889
Email Us

NSN 5305-01-462-1653

High Torque Screw

About this product

Between 0.135 inches and 0.168 inches fastener length, flush head style, between 0.690 inches and 0.710 inches head diameter, head height: 0.722 inches .

Manufacturer part number AIC9535-8-11 for national stock number 5305014621653.

Datasheet

  • Product description

    Close Tolerance Screw NSN 5305-01-462-1653.

  • MPN or Model

    AIC9535-8-11

  • Schedule B
    7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment)
  • Thread Class
    3a
  • Thread Direction
    Right-hand
  • Thread Length
    0.794 inches
  • Fastener Length
    Between 0.135 inches and 0.168 inches
  • Head Style
    Flush
  • Head Diameter
    Between 0.690 inches and 0.710 inches
  • Head Height
    0.722 inches
  • Grip Diameter
    Between 0.514 inches and 0.515 inches
  • Internal Drive Style
    Offset cruciform (torque set)
  • Thread Diameter
    0.500 inches
  • Grip Length
    Between 0.678 inches and 0.698 inches
  • Thready Qty Per Inch (tpi)
    20
  • Min. Tensile Strength (psi)
    30900 pounds per square inch
  • Countersink Angle
    Between 99.0 degrees and 101.0 degrees
  • Material
    Steel comp h11
  • Material Specification
    Ams6487 assn standard single material response
  • Surface Treatment
    Cadmium
  • Surface Treatment Specification
    Nas672 assn standard single treatment response
  • Thread Series Designator
    Unjf
More from these suppliers
Close Tolerance Screw

A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Mechanic Bill explains High Torque Screw

Pricing and Availability

Get a quote for 5305-01-462-1653 close tolerance screw
Quantity:
Your Email:
Your Name:
Company Name:
Optional reference:
Phone:
NSN 5305014621653

We do not share, sell, or distribute your information to any third party.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Manufacturer Part Numbers and Alternates
MPN manufacturer part number Registrant or Supplier
AIC9535-8-11 Sps Technologies, Llc
AIC9535-8-11 Sps Technologies, Llc
AIC9535-8-11 Sps Technologies, Llc
AIC9535-8-11 Sps Technologies, Llc
AIC9535-8-11 Sps Technologies, Llc
AIC9535-8-11 Sps Technologies, Llc
AIC9535-8-11 Sps Technologies, Llc
AIC9535-8-11 Sps Technologies, Llc
Stock Check
Availability of this NSN has not been updated recently. Submit the pricing and availbility form above to receive an up to date quote.