NSN 5305-01-464-0615
High Torque Screw
Between 3.011 inches and 3.041 inches fastener length, flat countersunk head style, between 0.221 inches and 0.279 inches head diameter, grip diameter: between 0.1365 inches and 0.1375 inches .
Manufacturer part number NAS1151E44 for national stock number 5305014640615.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-464-0615.
-
MPN or Model
NAS1151E44
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 3.011 inches and 3.041 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.221 inches and 0.279 inches -
Grip Diameter
Between 0.1365 inches and 0.1375 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.138 inches -
Grip Length
2.750 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
140000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjc -
Specification Data
80205-nas1151 professional/industrial association standard
More from these suppliers
- 5935-01-316-9334 MPN MS33688-28-21PElectrical Connector Insert
- 5940-01-394-0109 MPN NAS1063A3-TB504ACTerminal Board Marker Strip
- 5940-00-681-0402 MPN NAS705S2Stud Terminal
- 5305-00-007-0282 MPN NAS1100E08-12PMachine Screw
- 5305-00-007-9893 MPN NAS1102E04-13Machine Screw
- 5305-00-008-9112 MPN NAS1190C02T3LSocket Head Cap Screw
- 5305-00-051-4095 MPN MS24677-84Socket Head Cap Screw
- 5305-00-078-9643 MPN MS27039-1-34Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-464-0615 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1151E44 | National Aerospace Standards |
NAS1151E44 | National Aerospace Standards |
Stock Check
- NE: 599
- NS: 1