NSN 5305-01-464-3929
High Torque Screw
Between 0.449 inches and 0.479 inches fastener length, fillister countersunk head style, between 0.314 inches and 0.315 inches head diameter, head height: between 0.026 inches and 0.029 inches .
Manufacturer part number NAS1203-3D for national stock number 5305014643929.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-464-3929.
-
MPN or Model
NAS1203-3D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.449 inches and 0.479 inches -
Head Style
Fillister countersunk -
Head Diameter
Between 0.314 inches and 0.315 inches -
Head Height
Between 0.026 inches and 0.029 inches -
Grip Diameter
Between 0.189 inches and 0.190 inches -
Internal Drive Style
Cross recess type iii -
Thread Diameter
0.190 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Bolt 100 degrees close tolerance head and shank, 160000 psi short thread -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-449-7674 MPN NAS1063A12-N1000Terminal Board Marker Strip
- 5935-01-513-0334 MPN 5A088Electrical Receptacle Connector
- 5935-01-660-8063 MPN ES931VTElectrical Receptacle Connector
- 5305-00-003-8160 MPN NAS1351-5-28PSocket Head Cap Screw
- 5305-00-036-6759 MPN NAS623-4-58Machine Screw
- 5305-00-053-1082 MPN MS35199-46Machine Screw
- 5305-00-054-6671 MPN MS51957-46Machine Screw
- 5305-00-059-5432 MPN MS51958-82Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-464-3929 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1203-3D | National Aerospace Standards |
NAS1203-3D | National Aerospace Standards |
NAS1203-3D | National Aerospace Standards |
NAS1203-3D | National Aerospace Standards |
NAS1203-3D | National Aerospace Standards |
NAS1203-3D | National Aerospace Standards |
NAS1203-3D | National Aerospace Standards |