NSN 5305-01-465-3541
High Torque Screw
Between 1.473 inches and 1.503 inches fastener length, flat countersunk head style, 0.3047 inches head diameter, grip diameter: 0.188 inches .
Manufacturer part number NAS1581C3T18 for national stock number 5305014653541.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-465-3541.
-
MPN or Model
NAS1581C3T18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.348 inches and 0.378 inches -
Fastener Length
Between 1.473 inches and 1.503 inches -
Head Style
Flat countersunk -
Head Diameter
0.3047 inches -
Grip Diameter
0.188 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
1.125 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5732 assn standard single material response or ams5337 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1581 professional/industrial association standard
More from these suppliers
- 5940-01-386-5141 MPN NAS1063A12-1Terminal Board Marker Strip
- 5940-01-429-9493 MPN NAS1063A13-TBN1002Terminal Board Marker Strip
- 5935-01-577-3543 MPN MS27488-20-2Electrical Connector End Seal Plug
- 5305-00-034-1388 MPN NAS1624E6Machine Screw
- 5305-00-045-7603 MPN MS24625-42Tapping Screw
- 5305-00-068-5398 MPN MS24673-1Socket Head Cap Screw
- 5305-00-107-9312 MPN MS27039C0811Machine Screw
- 5305-00-150-0846 MPN NAS1189E02T14LSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-465-3541 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581C3T18 | National Aerospace Standards |