NSN 5305-01-465-6692
High Torque Screw
Has 132 ksi minimum shear.
Manufacturer part number AIC618-4-4 for national stock number 5305014656692.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-465-6692.
-
MPN or Model
AIC618-4-4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
Between 0.638 inches and 0.668 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.350 inches and 0.399 inches -
Head Height
0.063 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
F16 aircombfit -
Thread Diameter
0.250 inches -
Grip Length
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
3960 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 national specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-129-4432 MPN SC2671-3-11Machine Screw
- 5305-01-249-0460 MPN GB510FG3-2Close Tolerance Screw
- 5306-00-137-6580 MPN VAL23602-4D016Close Tolerance Bolt
- 5306-00-201-5628 MPN VAL23001-6D030Bolt
- 5306-00-905-8449 MPN VFK100G-05024Shear Bolt
- 5306-01-044-8529 MPN VAL23029-5D40Close Tolerance Bolt
- 5306-01-210-0731 MPN VAL23033-6D37XShoulder Bolt
- 5306-01-331-0481 MPN VAL23602-5D024Close Tolerance Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-465-6692 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC618-4-4 | Sps Technologies, Llc |
93926-4-4 | Sps Technologies, Llc |
C20645-4-4 | Lockheed Martin Corporation |
VT10021-4-4 | Valley-todeco, Inc. |
93926-4-4 | Sps Technologies, Llc |
GS1009-4-4 | B & B Specialties Inc. |