NSN 5305-01-467-1398
High Torque Screw
Point shall be flat and chamfered; name on standard is bolt, 100 degrees flush reduced head.
Manufacturer part number NAS1581K3T22 for national stock number 5305014671398.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-467-1398.
-
MPN or Model
NAS1581K3T22
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
Between 1.723 inches and 1.753 inches -
Head Style
Flat countersunk -
Head Diameter
0.2578 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
2320-01-123-1610 -
Thread Diameter
0.190 inches -
Grip Length
Between 1.723 inches and 1.753 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Titanium alloy uns r54520 -
Material Specification
Ams4928 assn standard 1st material response or ams4967 assn standard 2nd material response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-354-9984 MPN NAS1063A20-1007Terminal Board Marker Strip
- 5940-01-384-3924 MPN NAS1063C5TB177ATerminal Board Marker Strip
- 5305-00-005-0631 MPN NAS1509-22Close Tolerance Screw
- 5305-00-007-1556 MPN NAS1100C02-3PMachine Screw
- 5305-00-082-1988 MPN NAS1351C5-36Socket Head Cap Screw
- 5305-00-088-3819 MPN NAS1631-12Machine Screw
- 5305-00-141-7207 MPN NAS1155V34Close Tolerance Screw
- 5305-00-149-8671 MPN NAS1100E02-4Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-467-1398 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581K3T22 | National Aerospace Standards |
NAS1581K3T22 | National Aerospace Standards |