NSN 5305-01-467-2772
High Torque Screw
Internal drive ribbed.
Manufacturer part number NAS1578C3R6L for national stock number 5305014672772.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-467-2772.
-
MPN or Model
NAS1578C3R6L
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.338 inches and 0.388 inches -
Fastener Length
Between 0.723 inches and 0.753 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.360 inches and 0.374 inches -
Head Height
Between 0.115 inches and 0.125 inches -
Locking Feature
Patch threads or pellet threads or strip threads -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Plastic polyamide locking feature -
Material Specification
Ams 5731 assn standard single material response or ams 5732 assn standard single material response or ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1578 professional/industrial association standard
More from these suppliers
- 5940-00-833-5836 MPN NAS1063A2-703Terminal Board Marker Strip
- 5935-00-838-6814 MPN NAS714-19Electrical Receptacle Connector
- 5945-01-438-6249 MPN M83536/13-008LElectromagnetic Relay
- 5935-01-513-0334 MPN 5A088Electrical Receptacle Connector
- 5940-01-437-8564 MPN NAS1063A2-107CYTerminal Board Marker Strip
- 5305-00-004-3129 MPN NAS1190E04P15LSocket Head Cap Screw
- 5305-00-007-1556 MPN NAS1100E02-3PMachine Screw
- 5305-00-021-7245 MPN NAS1101-3H9Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-467-2772 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1578C3R6L | National Aerospace Standards |
NAS1578C3R6L | National Aerospace Standards |
NAS1578C3R6L | National Aerospace Standards |
NAS1578C3R6L | National Aerospace Standards |
NAS1578C3R6L | National Aerospace Standards |
NAS1578C3R6L | National Aerospace Standards |
NAS1578C3R6L | National Aerospace Standards |
NAS1578C3R6L | National Aerospace Standards |