NSN 5305-01-467-6448
Tap Bolt
0.750 inches fastener length, hexagon head style, between 0.250 inches and 0.260 inches head height, width between flats: between 0.592 inches and 0.600 inches .
Manufacturer part number 306-16124 for national stock number 5305014676448.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-01-467-6448.
-
MPN or Model
306-16124
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Direction
Right-hand -
Thread Length
0.750 inches -
Fastener Length
0.750 inches -
Head Style
Hexagon -
Head Height
Between 0.250 inches and 0.260 inches -
Width Between Flats
Between 0.592 inches and 0.600 inches -
Thread Diameter
0.375 inches -
Thready Qty Per Inch (tpi)
16 -
Material
Steel -
Material Specification
Ansi/asmeb1.1 assn standard 1st material response or saej429, gr2 assn standard 2nd material response -
Surface Treatment
Oxide -
Surface Treatment Specification
Saej123 assn standard 1st treatment response or astmf593, blackoxideorchemicalcoated assn standard 2nd treatment response -
Thread Series Designator
Unc
More from these suppliers
- 4820-00-355-3994 MPN S8603Safety Relief Valve
- 4820-00-835-4423 MPN 036-21767Valve Disk
- 5930-01-022-6567 MPN 782-60027Rotary Switch
- 4820-01-158-8178 MPN S17-43440Check Valve
- 4820-01-199-7912 MPN 033-70507Valve Seat
- 4820-01-286-4642 MPN 036-39808Directional Control Linear Valve Slide
- 5945-01-181-4592 MPN 120-10094-120V60HZSolenoid
- 5305-00-527-4880 MPN 308-12167CSocket Head Cap Screw
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-01-467-6448 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
306-16124 | Parker-hannifin Corporation |
M19-21121-D PC132 | Parker-hannifin Corporation |
PL-M19-21121-D PC 132 | Parker-hannifin Corporation |