NSN 5305-01-467-6773
High Torque Screw
Double shear strength in minimum pounds is 16,600.
Manufacturer part number NAS2835C16T for national stock number 5305014676773.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-467-6773.
-
MPN or Model
NAS2835C16T
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.438 inches -
Fastener Length
Between 1.438 inches and 1.453 inches -
Head Style
Flat countersunk -
Head Diameter
0.577 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
C-17a aircraft -
Thread Diameter
0.3125 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
10400 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Stainless steel -
Material Specification
Ams5731 assn standard 1st material response or ams5737 assn standard 2nd material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-384-3987 MPN NAS1063A2TB107ADTerminal Board Marker Strip
- 5305-00-008-2104 MPN NAS1100C02-6PMachine Screw
- 5305-00-052-8898 MPN MS24630-49Tapping Screw
- 5305-00-234-9732 MPN NAS1190E4P8NSocket Head Cap Screw
- 5305-00-269-3207 MPN MS90725-56Hexagon Head Cap Screw
- 5305-00-274-2310 MPN NAS608C440-6Socket Head Cap Screw
- 5305-00-395-3361 MPN NAS1101C08-5Machine Screw
- 5305-00-459-7523 MPN NAS1635-04LL2Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-467-6773 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS2835C16T | National Aerospace Standards |