NSN 5305-01-467-7474
High Torque Screw
Item has drilled shank at the threaded end, and the distance from end to shank hole center is 0.172 inch min., 0.192 inch max; the diameter of the hole is 0.076 inch min., 0.086 inch max..
Manufacturer part number NAS2835C15DT for national stock number 5305014677474.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-467-7474.
-
MPN or Model
NAS2835C15DT
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.438 inches -
Fastener Length
Between 1.361 inches and 1.391 inches -
Head Style
Flat countersunk -
Head Diameter
0.490 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
C-17a aircraft -
Thread Diameter
0.3125 inches -
Grip Length
Between 0.928 inches and 0.948 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Stainless steel -
Material Specification
Ams 5731 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-01-045-8086 MPN NAS1653R16B26PNElectrical Plug Connector
- 5940-01-451-4407 MPN NAS1063A10-105BVTerminal Board Marker Strip
- 5305-00-016-7126 MPN NAS1352-6LL32PSocket Head Cap Screw
- 5305-00-054-9229 MPN MS24694C117Machine Screw
- 5305-00-058-9379 MPN MS51977-51Setscrew
- 5305-00-068-5410 MPN MS16995-2Socket Head Cap Screw
- 5305-00-196-6353 MPN NAS1742C06R6USocket Head Cap Screw
- 5305-00-234-7814 MPN NAS1352-04LB6PSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-467-7474 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS2835C15DT | National Aerospace Standards |