NSN 5305-01-467-8136
High Torque Screw
Between 1.454 inches and 1.484 inches fastener length, flat countersunk head style, between 0.625 inches and 0.635 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number NAS1975-16T for national stock number 5305014678136.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-467-8136.
-
MPN or Model
NAS1975-16T
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
Between 1.454 inches and 1.484 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.625 inches and 0.635 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.3125 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-6049 military specification 3rd material response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-413-3011 MPN NAS1063B219-222Terminal Board Marker Strip
- 5940-01-425-6045 MPN NAS1063A5-440Terminal Board Marker Strip
- 5305-00-058-9364 MPN MS51977-21Setscrew
- 5305-00-079-2587 MPN NAS1351C4-28Socket Head Cap Screw
- 5305-00-088-9075 MPN MS35190-302Machine Screw
- 5305-00-123-2664 MPN NAS1351-04H4PSocket Head Cap Screw
- 5305-00-130-7656 MPN MS27039DD4-24Machine Screw
- 5305-00-150-0846 MPN NAS1189E02T14LSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-467-8136 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1975-16T | National Aerospace Standards |