NSN 5305-01-468-0540
High Torque Screw
Cotter pin hole in threaded portion- 0.076 in dia.
Manufacturer part number NAS334CP17-5 for national stock number 5305014680540.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-468-0540.
-
MPN or Model
NAS334CP17-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
1.969 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.497 inches and 0.507 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Internal Drive Style
Cross recess type ii -
End Application
Stabilixzer trim acuator, kc-135 -
Thread Diameter
0.250 inches -
Grip Length
1.500 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Material
Steel comp 4140 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification single material response or mil-s-8503 military specification 1st material response or mil-s-6098 military specification 2nd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-192-1831 MPN 29-35846-3Plug Dummy Connector
- 1560-00-329-8422 MPN 114H3035-1Control Rod Rod End
- 1560-00-340-9212 MPN 5-85654Aircraft Fairing
- 5905-00-359-9737 MPN BACRH14S200R0CDNoninductive Wire Wound Fixed Resistor
- 1560-00-440-7825 MPN 24-1512-504Aircraft Structural Plate
- 1560-00-486-6485 MPN 50-9577Power Housing Assembly
- 1560-00-610-1422 MPN 9-58911-506Aircraft Structural Component Support
- 4920-00-611-6286 MPN F52597Aircraft Maintenance Fixture
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-468-0540 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS334CP17-5 | The Boeing Company |
NAS334CP17-5 | The Boeing Company |
NAS334CP17-5 | The Boeing Company |
NAS334CP17-5 | The Boeing Company |
NAS334CP17-5 | The Boeing Company |