NSN 5305-01-468-3207
High Torque Screw
Between 0.672 inches and 0.702 inches fastener length, fillister countersunk head style, between 0.390 inches and 0.395 inches head diameter, head height: 0.015 inches .
Manufacturer part number HT4041-4-6-5 for national stock number 5305014683207.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-468-3207.
-
MPN or Model
HT4041-4-6-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.302 inches and 0.322 inches -
Fastener Length
Between 0.672 inches and 0.702 inches -
Head Style
Fillister countersunk -
Head Diameter
Between 0.390 inches and 0.395 inches -
Head Height
0.015 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
High-torque -
End Application
F-15 acft -
Thread Diameter
0.250 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Screw, machine -
Material
Steel comp xm-13 -
Material Specification
23-112, fscm 76301 mfr ref single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-456-2477 MPN NAS1101C04H16Machine Screw
- 5305-00-541-9045 MPN NAS1221-3-2Machine Screw
- 5305-00-927-0026 MPN NAS1125-30Close Tolerance Screw
- 5305-01-014-2590 MPN S5008-3-11Close Tolerance Screw
- 5305-01-043-1349 MPN NAS1189-04P26NHSocket Head Cap Screw
- 5305-01-141-7190 MPN HT4049-6D14XShoulder Screw
- 5305-01-141-7908 MPN HT4020-6-16AXShoulder Screw
- 5305-01-214-5058 MPN HT4060V3-12ASShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-468-3207 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4041-4-6-5 | Sps Technologies, Llc |
HT4041-4-6-5 | Hi-shear Corporation |
HT4041-4-6-5 | Alcoa Global Fasteners, Inc. |
HT4041-4-6-5 | Lisi Aerospace Canada Corp |
3M707-4-6-5 | Boeing Company, The |
HT4041-4-6-5 | Huck International, Inc. |
11873-4-6-5 | Reid Products Inc. |
HT4041-4-6-5 | Huck Intl Inc |