NSN 5305-01-468-5922
High Torque Screw
0.363 inches fastener length, flat countersunk head style, between 0.257 inches and 0.304 inches head diameter, grip diameter: between 0.204 inches and 0.205 inches .
Manufacturer part number NAS1581C3R15 for national stock number 5305014685922.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-468-5922.
-
MPN or Model
NAS1581C3R15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
0.363 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.257 inches and 0.304 inches -
Grip Diameter
Between 0.204 inches and 0.205 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
0.938 inches -
Thready Qty Per Inch (tpi)
32 -
Thread Pitch In Millimeters
0.8 -
External Thread Tolerance Class
3a -
Countersink Angle
Between 99.0 degrees and 100.0 degrees -
Material
Stainless steel -
Material Specification
Ams5731 assn standard 1st material response or ams5732 assn standard 2nd material response or ams5737 assn standard 3rd material response or ams5853 assn standard 4th material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification 1st treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-465-6149 MPN NAS1744-1Conductor Splice
- 5940-00-833-5836 MPN NAS1063A2-801Terminal Board Marker Strip
- 5935-01-256-0827 MPN NAS1599Electrical Plug Connector
- 5305-00-044-5504 MPN MS90725-158Hexagon Head Cap Screw
- 5305-00-051-4503 MPN MS51973-28Setscrew
- 5305-00-058-9366 MPN MS51977-23Setscrew
- 5305-00-140-0635 MPN NAS2805-24Close Tolerance Screw
- 5305-00-206-1189 MPN NAS220-26Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-468-5922 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581C3R15 | National Aerospace Standards |
NAS1581C3R15 | National Aerospace Standards |
NAS1581C3R15 | National Aerospace Standards |
NAS1581C3R15 | National Aerospace Standards |
NAS1581C3R15 | National Aerospace Standards |
NAS1581C3R15 | National Aerospace Standards |
NAS1581C3R15 | National Aerospace Standards |
NAS1581C3R15 | National Aerospace Standards |