NSN 5305-01-468-9141
High Torque Screw
Between 1.282 inches and 1.312 inches fastener length, flat countersunk head style, between 0.438 inches and 0.445 inches head diameter, spline minor diameter: 0.1570 inches .
Manufacturer part number 3M1262D5D16-5A for national stock number 5305014689141.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-468-9141.
-
MPN or Model
3M1262D5D16-5A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.312 inches -
Fastener Length
Between 1.282 inches and 1.312 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.438 inches and 0.445 inches -
Spline Minor Diameter
0.1570 inches -
Spline Major Diameter
0.1600 inches -
Grip Diameter
0.312 inches -
Internal Drive Style
Torx -
End Application
Used on fighter aircraft (f18-e/f) -
Thread Diameter
0.312 inches -
Grip Length
1.000 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Criticality Code Justification
Agav -
Part Name Assigned By Controlling Agency
Bolt 100 degree reduced head, gear drive recess-special thread length, ph13-8mo (125 ksi shear) -
Material
Stainless steel -
Surface Treatment
Aluminum -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-186-9221 MPN AIC82-4-30Close Tolerance Screw
- 5305-00-420-0705 MPN AIC82-6-25Close Tolerance Screw
- 5305-00-507-2295 MPN LS15262V3-3Machine Screw
- 5305-00-802-1827 MPN 51B221-1Close Tolerance Screw
- 5305-01-149-1940 MPN L-8052-6-5Shoulder Screw
- 5305-01-284-8380 MPN AIC618-5-26Close Tolerance Screw
- 5305-01-350-2246 MPN AIC1658-4A11Close Tolerance Screw
- 5305-01-351-5403 MPN AIC812-01-7Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-468-9141 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3M1262D5D16-5A | Boeing Company, The |
3M1262D5D16-5A | Arconic Global Fasteners & Rings, |
3M1262D5D16-5A | Sps Technologies, Llc |
3M1262D5D16-5A | Sps Technologies, Llc |
3M1262D5D16-5A | Sps Technologies, Llc |
11853D5D16-5A | Reid Products Inc. |
3M1262D5D16-5A | Hi-shear Corporation |
3M1262D5D16-5A | Sps Technologies, Llc |
3M1262D5D16-5A | Lisi Aerospace Canada Corp |
TX1024D5D16-5A | Sps Technologies Inc |
3M126 | Sps Technologies Inc |
3M1262D5D16-5A | Sps Technologies Inc |
TX1024D5D16-5A | Sps Technologies, Llc |
TX1024D5D16-5A | Arconic Global Fasteners & Rings, |
TX1024D5D16-5A | Sps Technologies, Llc |
HP1262D5D16-5 | Heartland Precision Fasteners, Inc. |
TX1024D5D16-5A | Sps Technologies, Llc |
TX1024D5D16-5A | Hi-shear Corporation |
TX1024D5D16-5A | Sps Technologies, Llc |