NSN 5305-01-469-3049
High Torque Screw
2.261 inches fastener length, pan head style, between 0.357 inches and 0.373 inches head diameter, head height: between 0.122 inches and 0.133 inches .
Manufacturer part number NAS7703-31 for national stock number 5305014693049.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-469-3049.
-
MPN or Model
NAS7703-31
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
2.261 inches -
Head Style
Pan -
Head Diameter
Between 0.357 inches and 0.373 inches -
Head Height
Between 0.122 inches and 0.133 inches -
Grip Diameter
Between 0.1825 inches and 0.1835 inches -
Internal Drive Style
Cross recess type 1 -
End Application
1520-01-355-8250 -
Thread Diameter
0.1900 inches -
Grip Length
Between 1.928 inches and 1.948 inches -
Thready Qty Per Inch (tpi)
32 -
Material
Steel comp 4140 -
Material Specification
Mil-s-5626 military specification single material response -
Surface Treatment
Cadmium head -
Surface Treatment Specification
Qq-p-320, class 2 federal specification single treatment response grip -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-425-6037 MPN NAS1063A5-432Terminal Board Marker Strip
- 5940-01-447-2944 MPN NAS1063A3-504ALTerminal Board Marker Strip
- 5940-01-664-5697 MPN NAS1063A2-107DLTerminal Board Marker Strip
- 5305-00-007-3020 MPN NAS1102E02-4PMachine Screw
- 5305-00-052-6881 MPN MS24627-63Tapping Screw
- 5305-00-059-4556 MPN NAS600-18PMachine Screw
- 5305-00-063-7662 MPN NAS1204-32Close Tolerance Screw
- 5305-00-150-0846 MPN NAS1189E02T14LSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-469-3049 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7703-31 | National Aerospace Standards |