NSN 5305-01-469-6476
High Torque Screw
Injection port location 0.18 inches.
Manufacturer part number 3M1034V4-7-18 for national stock number 5305014696476.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-469-6476.
-
MPN or Model
3M1034V4-7-18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.444 inches and 0.494 inches -
Fastener Length
Between 0.892 inches and 0.922 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.497 inches and 0.507 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
0.438 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Screw-close tolerance, 100 degrees hi-torqe, sealant injection -
Material
Stainless steel -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-046-3469 MPN 3442458Aircraft Access Door
- 1560-00-079-4013 MPN 32-58108-3Fuel Cell Line Assembly
- 1560-00-088-9080 MPN 32-83052-303Duct Assy
- 1560-00-088-9092 MPN 32-32301-14Shroud Latch
- 4920-00-116-7936 MPN 53E340008-303Fire Control System Test Set
- 1560-00-197-3721 MPN 32-311674-30Canopy Water Diverter
- 1560-00-203-8442 MPN 53-78013-4Door Support Arm
- 1560-00-225-5504 MPN 53-13005-304Aircraft Structural Panel
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-469-6476 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3M1034V4-7-18 | Boeing Company, The |
3M1034V4-7-18 | Boeing Company, The |
3M1034V4-7-18 | Boeing Company, The |
3M1034V4-7-18 | Boeing Company, The |
3M1034V4-7-18 | Boeing Company, The |
3M1034V4-7-18 | Boeing Company, The |
3M1034V4-7-18 | Boeing Company, The |