NSN 5305-01-469-6518
High Torque Screw
Nutplate cbore between grip and thds/captive panel.
Manufacturer part number AIC4465-4-25 for national stock number 5305014696518.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-469-6518.
-
MPN or Model
AIC4465-4-25
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093490 - Bolt/nut/screw/clips/fastener/etc -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.365 inches -
Fastener Length
Between 2.053 inches and 2.083 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.509 inches and 0.518 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
C-17 acft -
Thread Diameter
0.250 inches -
Grip Length
Between 1.552 inches and 1.572 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Bolt, close tolerance-captive, panel fastener -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5737 assn standard 1st material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-246-7449 MPN C623-3-3Close Tolerance Screw
- 5305-00-372-9975 MPN AIC811-08-11Socket Head Cap Screw
- 5305-00-951-1140 MPN AIC1315-024Machine Screw
- 5305-01-263-3804 MPN AIC4043-06-11RMachine Screw
- 5305-01-462-2848 MPN TX1026V3-3AClose Tolerance Screw
- 5305-01-465-2439 MPN TX1027D3-4AClose Tolerance Screw
- 5305-01-512-8299 MPN TX1027C6-18AClose Tolerance Screw
- 5305-01-590-4115 MPN BACS12FA3K8BKMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-469-6518 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC4465-4-25 | Sps Technologies, Llc |
SC1752-4-25 | Arconic Global Fasteners & Rings, |
123370-4-25 | Sps Technologies, Llc |
S00465-4-25 | Boeing Company, The |
S00465-4-25 | Boeing Company, The |
AIC4465-4-25 | Sps Technologies, Llc |
SC1752-4-25 | Arconic Global Fasteners & Rings, |
123370-4-25 | Sps Technologies, Llc |
S00465-4-25 | Boeing Company, The |
AIC4465-4-25 | Sps Technologies, Llc |
SC1752-4-25 | Arconic Global Fasteners & Rings, |
123370-4-25 | Sps Technologies, Llc |
S00465-4-25 | Boeing Company, The |
AIC4465-4-25 | Sps Technologies, Llc |
SC1752-4-25 | Arconic Global Fasteners & Rings, |
123370-4-25 | Sps Technologies, Llc |
S00465-4-25 | Boeing Company, The |
AIC4465-4-25 | Sps Technologies, Llc |
SC1752-4-25 | Arconic Global Fasteners & Rings, |
123370-4-25 | Sps Technologies, Llc |
S00465-4-25 | Boeing Company, The |
AIC4465-4-25 | Sps Technologies, Llc |
SC1752-4-25 | Arconic Global Fasteners & Rings, |
123370-4-25 | Sps Technologies, Llc |
S00465-4-25 | Boeing Company, The |