NSN 5305-01-470-0864
High Torque Screw
Internal drive ribbed.
Manufacturer part number NAS1581C3R1 for national stock number 5305014700864.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-470-0864.
-
MPN or Model
NAS1581C3R1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.337 inches and 0.387 inches -
Fastener Length
Between 0.471 inches and 0.502 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.258 inches and 0.305 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.052 inches and 0.072 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5732 assn standard single material response or ams5737 assn standard single material response or ams5853 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1581 professional/industrial association standard
More from these suppliers
- 5940-01-652-2533 MPN NAS1063A4-TB138RDTerminal Board Marker Strip
- 5305-00-052-7442 MPN MS24627-3Tapping Screw
- 5305-00-053-1079 MPN MS35199-42Machine Screw
- 5305-00-058-4012 MPN MIL-S-7839Machine Screw
- 5305-00-059-2490 MPN MS51976-46Setscrew
- 5305-00-078-9820 MPN NAS517-3-39Machine Screw
- 5305-00-115-6187 MPN MS21097-3014Socket Head Cap Screw
- 5305-00-197-2355 MPN NAS340CPA20Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-470-0864 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581C3R1 | National Aerospace Standards |