NSN 5305-01-470-7020
Self-tapping Screw
Item is a self-tapping, removable, concrete anchor with a specially designed two lead thread, two threads of unequal size, larger diameter thread is notched at intervals along its length to facilitate tapping into masonry materials; a specially-sized carbide-tipped drill bit is suplied with each box of anchors for hole preparation; installation hole shouldbe drilled to not less than one-quarter inch deeper than the anchor penetration into the masonry; the finish has a proprietary synthetic polymer coating; the end item identification is the next generation radar (nexrad), which is used by the national weather service (nws).
Manufacturer part number 3153407 for national stock number 5305014707020.
Datasheet
-
Product description
Tapping Screw NSN 5305-01-470-7020.
-
MPN or Model
3153407
-
Schedule B
7318.14.0000 (Self-tapping screws of iron or steel) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Fastener Length
Between 1.2032 inches and 1.2968 inches -
Head Style
Chamfer flange -
Head Height
Between 0.170 inches and 0.190 inches -
Width Between Flats
Between 0.305 inches and 0.310 inches -
Extended Washer Diameter
Between 0.398 inches and 0.432 inches -
Internal Drive Style
Slot -
End Application
Radar -
Nonmachine Thread Style
Cone point (type bp) -
Nonmachine Thread Diameter
0.260 inches -
Material
Steel comp 1022 -
Material Specification
Fed-std-66 federal standard single material response
More from these suppliers
- 5950-00-055-1747 MPN 2382573-4Radio Frequency Coil
- 5935-00-074-4621 MPN 1002068Electrical Receptacle Connector
- 5985-00-093-5619 MPN 657859Antenna
- 5905-00-195-9703 MPN 828616-1Precision Wire Wound Variable Resistor
- 5935-00-224-8148 MPN 219461Electrical Connector Backshell
- 5935-00-296-8421 MPN 219150Plug-in Electronic Components Socket
- 5905-00-482-7751 MPN 339078-392Film Fixed Resistor
- 5930-00-504-6223 MPN 632276-3Push Switch
A hardened externally threaded fastener whose thread extends to the bearing surface of the head. The thread may be fluted or otherwise designed to cut or form its own mating thread. Excludes screw, assembled washer.
Pricing and Availability
Get a quote for 5305-01-470-7020 tapping screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3153407 | Illinois Tool Works Inc |
1217031-201 | Lockheed Martin Corporation |