NSN 5305-01-472-0296
High Torque Screw
1.463 inches fastener length, flat countersunk head style, 0.350 inches head diameter, grip diameter: between 0.248 inches and 0.249 inches .
Manufacturer part number NAS1581C4R17P for national stock number 5305014720296.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-472-0296.
-
MPN or Model
NAS1581C4R17P
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
1.463 inches -
Head Style
Flat countersunk -
Head Diameter
0.350 inches -
Grip Diameter
Between 0.248 inches and 0.249 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 1.006 inches and 1.026 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
16000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5731 national std/spec single material response or ams 5732 national std/spec single material response or ams 5737 national std/spec single material response or ams 5853 national std/spec single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ams qq-p-416, ty ii, cl 2 national std/spec single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-451-4001 MPN NAS1063A10-105BSTerminal Board Marker Strip
- 5305-00-005-5809 MPN NAS1631E3Machine Screw
- 5305-00-007-6201 MPN NAS1102E04-9Machine Screw
- 5305-00-008-5846 MPN NAS1632C26Machine Screw
- 5305-00-114-1911 MPN NAS1352-10LE96PSocket Head Cap Screw
- 5305-00-144-0348 MPN NAS1218-06-6PMachine Screw
- 5305-00-149-9942 MPN NAS334A6Close Tolerance Screw
- 5305-00-211-3436 MPN NAS1635-3LN8Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-472-0296 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581C4R17P | National Aerospace Standards |