NSN 5305-01-472-4367
Panel Screw
Altered from ms16997-69.
Manufacturer part number 12986250 for national stock number 5305014724367.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-472-4367.
-
MPN or Model
12986250
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.380 inches -
Fastener Length
2.593 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.365 inches and 0.375 inches -
Head Height
Between 0.244 inches and 0.250 inches -
First Diameter From Head
0.250 inches -
Second Diameter From Head
Between 0.170 inches and 0.180 inches -
Third Diameter From Head
0.250 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
1.213 inches -
Distance From Largest Bearing Surface Of Head To End Of Second Diameter
2.213 inches -
Internal Drive Style
Hexagon -
End Application
Bradley -
Thread Diameter
0.250 inches -
Width Across Flats
Between 0.187 inches and 0.190 inches -
Thready Qty Per Inch (tpi)
20 -
Hardness Rating
36.0 rockwell c and 45.0 rockwell c -
Externally Relieved Body Diameter Quantity
3 -
Material
Steel -
Surface Treatment
Zinc -
Surface Treatment Specification
Astm a633, type ii, sc2 assn standard single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5905-00-187-9163 MPN 8213508-7Inductive Wire Wound Fixed Resistor
- 5905-00-192-0524 MPN 7599055Film Fixed Resistor
- 5905-00-535-9256 MPN 8518499Film Fixed Resistor
- 5905-00-571-6064 MPN 7599055Film Fixed Resistor
- 5940-01-100-8113 MPN 12271896Terminal Board
- 5930-01-151-6483 MPN 5577688Box Switch
- 5950-01-235-1815 MPN 11784917Radio Frequency Coil
- 5935-01-400-2334 MPN 12923342-1Electrical Plug Connector
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-472-4367 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
12986250 | Us Army Ardec Rdecom |